Prolific Usb To Serial

• Prolific Usb To Serial Driver 3.3.2.102

USB to Serial Adapter – Prolific PL-2303 – 3 ft / 1m – DB9 (9-pin) – USB to RS232 Adapter Cable – USB SerialI use Prolific USB to RJ45 Ethernet dongle and I found that recently in almost any Windows version, I get Core 10 error. This guide shows how to fix Prolific USB to Serial or Prolific USB RJ45 Ethernet Code 10 error. This guide should work for Windows XP, Windows 7, Windows 8, Windows 8.1 and Windows 10 and both 32 bit or 64 bit. Specific driver for my USB dongle is Prolific PL 2303 Driver (VID067B&PID2303) What I did (this didn’t work)Plugged in the Prolific dongle and this is what I get via Device Manager.

Please be warned that counterfeit fake PL-2303HX Chip Rev A USB to Serial Controller ICs using Prolific's trademark. Product: FB1210 USB to. Prolific Comm Port From Gateway: This package supports. Prolific USB to Serial Comm Port Driver: Hello everyone!Are you looking for Prolific USB to Serial Comm Port Driver? If your answer is yes, then be with us. This page contains all the information about the Prolific USB to Serial Comm Port Driver and how to install it.

Prolific USB to Serial Comm Port Driver Overview. If you are using a Prolific USB-to-Serial device such as PL2303, after upgrading the system to Windows 10, it is out of work. And when you open device manager, there is a yellow exclamation in the Ports (COM & LPT) list: Prolific USB-to-Serial.

So yes, Windows didn’t pick up the driver. So I used good old trusty google.com and searched for “Prolific Driver”. Hit the first result (that looks like the official Prolific Page: ) and downloadedThis zip file contained 3 files and obviously I ran PL2303ProlificDriverInstallerv1170.exe file to install Prolific Driver in good faith. After that, it didn’t improve at all. My Device Manager in Windows shows the following:The Yellow triangle next to Prolific USB-to-Serial Comm Port (COM4) means correct driver version is not installed. Right-click properties shows the following:Great!!!The device cannot start. (Code 10)A device which does not exist was specified.You normally get a variation of the following messages.

Prolific Usb To Serial Driver 3.3.2.102

This Device cannot start (Code 10). The drivers for this device are not installed. (Code 28). No driver installed for this device. Device driver was not successfully installed. There are no compatible drivers for this device.To make it worse, I got this Prolific USB to Ethernet/RJ45 adapter directly from IBM.

There’s seems to be a lot of threads around different website/forums discussing this problem, but I just couldn’t find a fix and the reason for it. Every company selling these Prolific USB dongle claims they are selling the correct version and chipset but Windows simply didn’t detect these when I’ve(or most people) used the Prolific Driver. It seems the main cause of this issue is these devices are using counterfeit Prolific chip made in China or in some cases as claimed by companies Taiwan. Good or bad, original or counterfeit; they all uses the same hardware id and product id that’s registered to Windows Registry. Vendor ID: VID067B.

Product ID: PID2303To combat this, original Prolific company made changes to their newest drivers to render the counterfeit adapters unusable.

Fail to connect your devices with Windows 10 using the Prolific USB to Serial adapter cable? Besides, you might notice there’s a yellow warning mark with Prolific USB to Serial driver in Device Manager. That could be really frustratingDon’t panic. Certainly you’re not the only one. We’ve seen many Windows users reporting this Prolific USB to Serial driver not working on Windows 10 issue.

More importantly, you can easily fix it with the solutions here. Read on and see how Try these fixes:.Solution 1: Update your Prolific USB to Serial driver to the latest versionYour not working Prolific USB to Serial driver problem could be caused by the corrupted, missing or outdated driver itself. So it would help if you update the driver to the latest version.You can update your Prolific USB to Serial driver to the latest version either manually or automatically.

Manual driver update – You can update your Prolific USB to Serial driver manually by going to the official, and searching for the most recent correct driver. Be sure to choose the only driver that is compatible with your Windows version. Automatic driver update – If you don’t have the time, patience or computer skills to update your Prolific USB to Serial driver manually, you can, instead, do it automatically with.

Driver Easy will automatically recognize your system and find the correct driver for your exact Prolific adapter, and your Windows version, and it will download and install them correctly:.and install Driver Easy.Run Driver Easy and click the Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.Click Update next to the flagged Prolific USB to Serial driver to automatically download the correct version of that driver, then you can manually install it (you can do this with the FREE version).Or click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system. (This requires the which comes with full support and a 30-day money back guarantee.

You’ll be prompted to upgrade when you click Update All.)Solution 2: Roll your Prolific USB to Serial driver back to an older versionYou may note that up-to-date drivers always keep your devices works in the best condition. But sometimes the latest driver doesn’t work with old hardware.When you upgrade your older Windows system to the latest Windows 10, or perform updates directly on Windows 10, the Prolific USB to Serial driver also gets update, and if it doesn’t work with your old hardware, you might have the problem.

So you can try to downgrade your Prolific USB to Serial driver.Here’s how you can do it:.On your desktop, right-click on the Start button, then select Device Manager.Double-click Ports(COM & LPT), then right-click on your Prolific USB to Serial driver to select Update driver.Click Browse my computer for driver software.Select Let me pick from a list of available drivers on my computer.Select an older version on the Model list. Then Next.Then the driver you select would be installed on your Windows 10 computer automatically.Once it’s done, connect your device again and see if it goes well.Hopefully this helps. Feel free to comment below with your own experiences.